Current issue
Archive
About the Journal
Editorial Policies
For Authors

Topic materials engineering

 
ORIGINAL PAPER
 

Experimental Investigation of the Thermal Behavior of Semi-Solid Materials
Omar Abdulhadi Mustafa, Ayad Suleiman Abdallah, Zainab H. Alkhaffaf
International Journal of Applied Mechanics and Engineering 2025;30(3):87-96
DOI: https://doi.org/10.59441/ijame/207768
 
ORIGINAL PAPER
 

Springback prediction of sheet metal hydroforming using finite element analysis and artificial neural networks
YASSINE FARTOUH, Mohamed BOUZAFFOUR, Mohammed NASSRAOUI
International Journal of Applied Mechanics and Engineering 2025;30(3):42-56
DOI: https://doi.org/10.59441/ijame/205461
 
ORIGINAL PAPER
 

EFFECT OF THE CHOICE OF DRAWBEAD TYPE ON THE SPRING BACK: COMPARATIVE STUDY BETWEEN TWO TYPES OF DRAWBEAD
MOHAMED BOUZAFFOUR, FARTOUH YASSINE, MOHAMMED NASSRAOUI
International Journal of Applied Mechanics and Engineering 2025;30(3):11-25
DOI: https://doi.org/10.59441/ijame/205460
 
ORIGINAL PAPER
 

Prediction of degradation in 90° elbow joints of ba35 brass used in potable water pipes through computational fluid dynamics (CFD) simulation
Hayat Bennis Touhaf, Houcine Zniker, Mohammed Khalil El Kouifat, Mounir Bennajah, Bennaceur Ouaki
International Journal of Applied Mechanics and Engineering 2025;30(2):46-61
DOI: https://doi.org/10.59441/ijame/203785
 
ORIGINAL PAPER
 

Sensitivity analysis and uncertainty quantification of stiffness modulus using indirect tensile test
Hicham Mezouara, Houcine Zniker, Ikram Feddal, Mohammed Khalil El Kouifat, Mohamed El Hasnaoui
International Journal of Applied Mechanics and Engineering 2025;30(2):105-123
DOI: https://doi.org/10.59441/ijame/203165
 
ORIGINAL PAPER
 

Analysis and Optimization of Epicyclic Mechanisms with Mutually Meshed Satellites for Engineering and Industrial Applications
Sylvester Bozherikov, Hristo Uzunov, Silvia Dechkova, Mina Tsoneva
International Journal of Applied Mechanics and Engineering 2025;30(2):62-88
DOI: https://doi.org/10.59441/ijame/202709
 
ORIGINAL PAPER
 

Fault Prediction Of Pharmaceutical Air Compressor Using The Intelligent Model Based On The Bayesian Network
Mohamed AMRANI, Djamel BENAZZOUZ
International Journal of Applied Mechanics and Engineering 2025;30(2):20-30
DOI: https://doi.org/10.59441/ijame/195999
 
ORIGINAL PAPER
 

Analytical Investigation of TAR for Enhancing Performance Using Varied Stack configuration and Varied Working Fluid
Kamlesh S. Shelke, Uday S. Wankhede, Anand Kumar Yadav, Pawel Jurczak
International Journal of Applied Mechanics and Engineering 2025;30(1):127-142
DOI: https://doi.org/10.59441/ijame/197489
 
ORIGINAL PAPER
 

The effect of mechanical properties on polymer deformation and flow suspension in the Selective Laser Sintering process
Rihab Rihab Belgada
International Journal of Applied Mechanics and Engineering 2025;30(1):21-35
DOI: https://doi.org/10.59441/ijame/197488
 
ORIGINAL PAPER
 

Kinematic Analysis and Synthesis of a Compound Epicyclic Gear Mechanism with Intermeshing Satellites
Sylvester Bozherikov, Mina Tsoneva, Hristo Uzunov, Silvia Dechkova
International Journal of Applied Mechanics and Engineering 2025;30(1):36-52
DOI: https://doi.org/10.59441/ijame/197487
 
ORIGINAL PAPER
 

Comparison of The Mechanical Properties of Low-Cost Bio Fiber Reinforced Polymer Composites
Sanad Abdulkareem Ismael, Samara Munaem Naeem
International Journal of Applied Mechanics and Engineering 2025;30(1):65-78
DOI: https://doi.org/10.59441/ijame/197434
 
ORIGINAL PAPER
 

Evaluation of microstructure and mechanical properties resulting from gas nitriding process for different types of steel
Faras Q. Mohammed, Ibrahim Abd L-Kareem Ahmed, Sameer Khalaf Fayyadh
International Journal of Applied Mechanics and Engineering 2025;30(1):101-111
DOI: https://doi.org/10.59441/ijame/195997
 
ORIGINAL PAPER
 

Improvement Friction Welded 6063 – T6 Aluminum Alloy Joint Properties
Basim M. A. AL BHADLE, Safaa M. HASSONI, Kharia Salman HASSAN
International Journal of Applied Mechanics and Engineering 2024;29(4):24-32
DOI: https://doi.org/10.59441/ijame/192271
 
ORIGINAL PAPER
 

Intelligent Systems Model For Selective Laser Melting (Slm) Additive Modeling Of The Damping Of Ti-6al-4v In Turbulent Flow During Powder Bed Melting In The Manufacturing Process
Rihab Rihab Belgada
International Journal of Applied Mechanics and Engineering 2024;29(4):47-60
DOI: https://doi.org/10.59441/ijame/190833
 
ORIGINAL PAPER
 

Heat transfer modelling in an annular disc under heating and cooling processes with stress analysis
Indrajeet Varhadpande, VRK Murty, Navneet Kumar Lamba
International Journal of Applied Mechanics and Engineering 2024;29(3):166-181
DOI: https://doi.org/10.59441/ijame/187052
 
ORIGINAL PAPER
 

Failure analysis and Mechanical Behaviour of A60 steel Bollards Used In Port Infrastructure
Mohammed Khalil El Kouifat, Houcine Zniker, Ikram Feddal, Bennaceur Ouaki
International Journal of Applied Mechanics and Engineering 2024;29(2):67-78
DOI: https://doi.org/10.59441/ijame/188100
 
ORIGINAL PAPER
 

Thermal stresses associated with a thermosensitive multilayered disc analysed due to point heating
V. B. Srinivas, V. R. Manthena, S. D. Warbhe, G. D. Kedar, Navneet Kumar Lamba
International Journal of Applied Mechanics and Engineering 2024;29(2):118-137
DOI: https://doi.org/10.59441/ijame/187051
 
ORIGINAL PAPER
 

Accurate Computational Approach for Singularly Perturbed Burger-Huxley Equations
Tesfaye Aga Bullo, Masho Jima Kabeto, Habtamu Garoma Debela, Gemadi Roba Kusi, Sisay Dibaba Robi
International Journal of Applied Mechanics and Engineering 2024;29(2):16-25
DOI: https://doi.org/10.59441/ijame/187049
 
ORIGINAL PAPER
 

Process Parameters Influence the Mechanical Properties and Nugget Diameter of AISI 316 Stainless Steel During Resistance Spot Welding
Mahmood Mohammed HAMZAH, Osamah Sabah Barrak, Isam Tareq ABDULLAH, Aws Abdulillah Hussein, Sabah Khammass HUSSEIN
International Journal of Applied Mechanics and Engineering 2024;29(2):79-89
DOI: https://doi.org/10.59441/ijame/186956
 
ORIGINAL PAPER
 

Rheological and mechanical behavior study of eco-friendly cement mortar made with marble powder
Kahina Chahour, Hamza Mechakra, Brahim Safi, Nacera-Melissa Dehbi, Cylia Chaibet
International Journal of Applied Mechanics and Engineering 2024;29(1):19-35
DOI: https://doi.org/10.59441/ijame/176204
 
ORIGINAL PAPER
 

Response of stiffness and viscosity on the energy ratios at piezo-visco-thermo-elastic medium
Sandeep Kumar, Neelam Kumari, Vipin Gupta, M.S. Barak
International Journal of Applied Mechanics and Engineering 2024;29(1):54-72
DOI: https://doi.org/10.59441/ijame/174992
 
ORIGINAL PAPER
 

Еlastic properties of tyres affecting car comfort, driving and riding
Silvia Dechkova
International Journal of Applied Mechanics and Engineering 2023;28(4):54-68
DOI: https://doi.org/10.59441/ijame/173020
 
ORIGINAL PAPER
 

Magnetic effects on surface waves in a rotating non-homogeneous half-space with grooved and impedance boundary characteristics
Augustine Igwebuike Anya, Christian Nwachioma, Hashmat Ali
International Journal of Applied Mechanics and Engineering 2023;28(4):26-42
DOI: https://doi.org/10.59441/ijame/172634
 
Most read
Indexes
 
Keywords index
Topics index
Authors index
eISSN:2353-9003
ISSN:1734-4492
Journals System - logo
In the years 2019-2020, the International Journal of Applied Mechanics and Engineering is financed under contract no. 634/P-DUN/2019 by the Minister of Science and Higher Education from funds for science dissemination activities. The financing amounts to 83.500 PLN.
Task: edition of a scientific journal, its internationalization and ensuring open access to the journal via the Internet
© 2006-2025 Journal hosting platform by Bentus
Scroll to top