Current issue
Archive
About the Journal
Editorial Policies
For Authors

Archive
2/2017 vol. 22
 
 
ORIGINAL PAPER
 

Analytical Solution of Mixed Boundary Value Problems Using the Displacement Potential Approach for the Case of Plane Stress and Plane Strain Conditions
S.K. Deb Nath
International Journal of Applied Mechanics and Engineering 2017;22(2):269-291
DOI: https://doi.org/10.1515/ijame-2017-0016
 
ORIGINAL PAPER
 

On Some Mechanical Properties and Wear Behavior of Sintered Bronze Based Composites Reinforced with Some Aluminides Microadditives
E. Feldshtein, P. Kiełek, T. Kiełek, L. Dyachkova, A. Letsko
International Journal of Applied Mechanics and Engineering 2017;22(2):293-302
DOI: https://doi.org/10.1515/ijame-2017-0017
 
ORIGINAL PAPER
 

Effect of Hall Current in Thermoelastic Materials with Double Porosity Structure
R. Kumar, R. Vohra
International Journal of Applied Mechanics and Engineering 2017;22(2):303-319
DOI: https://doi.org/10.1515/ijame-2017-0018
 
ORIGINAL PAPER
 

Effect of Relative Velocity Between Rough Surfaces: Hydrodynamic Lubrication of Rotary Lip Seal
I. Lahjouji, M. El Gadari, B. El Fahime, M. Radouani
International Journal of Applied Mechanics and Engineering 2017;22(2):321-332
DOI: https://doi.org/10.1515/ijame-2017-0019
 
ORIGINAL PAPER
 

Simulating Progressive Damage of Notched Composite Laminates with Various Lamination Schemes
B. Mandal, A. Chakrabarti
International Journal of Applied Mechanics and Engineering 2017;22(2):333-347
DOI: https://doi.org/10.1515/ijame-2017-0020
 
ORIGINAL PAPER
 

Exact Solution of the Harmonic Problem for a Rectangular Plate in Flat Deformation by the Method of Initial Functions
E.T. Olodo, V. Adanhounme, M.N. Hounkonnou
International Journal of Applied Mechanics and Engineering 2017;22(2):349-361
DOI: https://doi.org/10.1515/ijame-2017-0021
 
ORIGINAL PAPER
 

Unsteady MHD Mixed Convection Flow of a Micropolar Fluid Over a Vertical Wedge
N.C. Roy, R.S.R. Gorla
International Journal of Applied Mechanics and Engineering 2017;22(2):363-391
DOI: https://doi.org/10.1515/ijame-2017-0022
 
ORIGINAL PAPER
 

Fem and Experimental Analysis of Thin-Walled Composite Elements Under Compression
P. Różyło, P. Wysmulski, K. Falkowicz
International Journal of Applied Mechanics and Engineering 2017;22(2):393-402
DOI: https://doi.org/10.1515/ijame-2017-0023
 
ORIGINAL PAPER
 

Transport of MHD Couple Stress Fluid Through Peristalsis in a Porous Medium Under the Influence of Heat Transfer and Slip Effects
G.C. Sankad, P.S. Nagathan
International Journal of Applied Mechanics and Engineering 2017;22(2):403-414
DOI: https://doi.org/10.1515/ijame-2017-0024
 
ORIGINAL PAPER
 

Mathematical Modeling of Torsional Surface Wave Propagation in a Non-Homogeneous Transverse Isotropic Elastic Solid Semi-Infinite Medium Under a Layer
M. Sethi, A. Sharma, A. Vasishth
International Journal of Applied Mechanics and Engineering 2017;22(2):415-426
DOI: https://doi.org/10.1515/ijame-2017-0025
 
ORIGINAL PAPER
 

Curvilinear Squeeze Film Bearing with Porous Wall Lubricated by a Rabinowitsch Fluid
A. Walicka, E. Walicki, P. Jurczak, J. Falicki
International Journal of Applied Mechanics and Engineering 2017;22(2):427-441
DOI: https://doi.org/10.1515/ijame-2017-0026
 
ORIGINAL PAPER
 

Essential Factors For The Changes In Concrete During Electrochemical Extraction
A. Alsabry
International Journal of Applied Mechanics and Engineering 2017;22(2):443-450
DOI: https://doi.org/10.1515/ijame-2017-0027
 
ORIGINAL PAPER
 

Natural Frequencies of Axisymmetric Vibrations of Thin Hyperbolic Circular Plates with Clamped Edges
J. Jaroszewicz
International Journal of Applied Mechanics and Engineering 2017;22(2):451-457
DOI: https://doi.org/10.1515/ijame-2017-0028
 
ORIGINAL PAPER
 

Reversed Robin Hood Syndrome in the Light of Nonlinear Model of Cerebral Circulation
A. Piechna, K. Cieslicki
International Journal of Applied Mechanics and Engineering 2017;22(2):459-464
DOI: https://doi.org/10.1515/ijame-2017-0029
 
ORIGINAL PAPER
 

Mechanical Parameters of the Curvilinear Squeeze Film Bearing Lubricated by a Gecim-Winer Fluid
A. Walicka, E. Walicki
International Journal of Applied Mechanics and Engineering 2017;22(2):465-473
DOI: https://doi.org/10.1515/ijame-2017-0030
 
ORIGINAL PAPER
 

Identification Damage Model for Thermomechanical Degradation of Ductile Heterogeneous Materials
A. El Amri, M.H. El Yakhloufi, A. Khamlichi
International Journal of Applied Mechanics and Engineering 2017;22(2):475-481
DOI: https://doi.org/10.1515/ijame-2017-0031
 
ORIGINAL PAPER
 

Comparative Numerical Analysis of Different Strengthening Systems of Historical Brick Arches
M. Zielińska
International Journal of Applied Mechanics and Engineering 2017;22(2):483-491
DOI: https://doi.org/10.2478/ijame-2017-0032
 
Most read
Indexes
 
Keywords index
Topics index
Authors index
eISSN:2353-9003
ISSN:1734-4492
Journals System - logo
In the years 2019-2020, the International Journal of Applied Mechanics and Engineering is financed under contract no. 634/P-DUN/2019 by the Minister of Science and Higher Education from funds for science dissemination activities. The financing amounts to 83.500 PLN.
Task: edition of a scientific journal, its internationalization and ensuring open access to the journal via the Internet
© 2006-2025 Journal hosting platform by Bentus
Scroll to top