Current issue
Archive
About the Journal
Editorial Policies
For Authors

Archive
4/2014 vol. 19
 
 
ORIGINAL PAPER
 

Modelling and Motion Analysis of Five-Bar 5R Mechanism
Z. Budniak, T. Bil
International Journal of Applied Mechanics and Engineering 2014;19(4):677-686
DOI: https://doi.org/10.2478/ijame-2014-0046
 
ORIGINAL PAPER
 

Determination of Constant Parameters of Copper as Power-Law Hardening Material at Different Test Conditions
Md. A. Kowser, Md. Mahiuddin
International Journal of Applied Mechanics and Engineering 2014;19(4):687-698
DOI: https://doi.org/10.2478/ijame-2014-0047
 
ORIGINAL PAPER
 

Novel Solution for Leg Motion with 5-Link Belt Mechanism
Lovasz E.Ch., Pop C., Pop F., Dolga V.
International Journal of Applied Mechanics and Engineering 2014;19(4):699-708
DOI: https://doi.org/10.2478/ijame-2014-0048
 
ORIGINAL PAPER
 

Finite Difference Solution of Unsteady Flow Past an Oscillating Semi-Infinite Vertical Plate with Variable Surface Temperature and Uniform Mass Flux
R. Muthucumaraswamy, B. Saravanan
International Journal of Applied Mechanics and Engineering 2014;19(4):709-724
DOI: https://doi.org/10.2478/ijame-2014-0049
 
ORIGINAL PAPER
 

Identification of Heredity Kernels and Their Influence on the Life Time of Glass/Polyester Composites
E.T. Olodo, E.C. Adjovi, V. Adanhounme
International Journal of Applied Mechanics and Engineering 2014;19(4):725-734
DOI: https://doi.org/10.2478/ijame-2014-0050
 
ORIGINAL PAPER
 

Reflection of P-Wave and Sv-Wave in a Generalized Two Temperature Thermoelastic Half-Space
S. Santra, A. Lahiri, N.C. Das
International Journal of Applied Mechanics and Engineering 2014;19(4):735-754
DOI: https://doi.org/10.2478/ijame-2014-0051
 
ORIGINAL PAPER
 

Response Due to Concentrated Force in Micropolar Elastic Solid with Voids
R. Singh, K. Singh
International Journal of Applied Mechanics and Engineering 2014;19(4):755-769
DOI: https://doi.org/10.2478/ijame-2014-0052
 
ORIGINAL PAPER
 

Kinematic and Dynamic Analysis of New Polar Positioning System Dedicated to Mechatronic Laser Glass Engraving System
R. Trochimczuk
International Journal of Applied Mechanics and Engineering 2014;19(4):771-781
DOI: https://doi.org/10.2478/ijame-2014-0053
 
ORIGINAL PAPER
 

Determining the Errors in Output Kinematic Parameters of Planar Mechanisms with a Complex Structure
W. Trzaska
International Journal of Applied Mechanics and Engineering 2014;19(4):783-793
DOI: https://doi.org/10.2478/ijame-2014-0054
 
ORIGINAL PAPER
 

Porous Squeeze Film Bearing with Rough Surfaces Lubricated by a Bingham Fluid
A. Walicka, E. Walicki, P. Jurczak, J. Falicki
International Journal of Applied Mechanics and Engineering 2014;19(4):795-808
DOI: https://doi.org/10.2478/ijame-2014-0055
 
ORIGINAL PAPER
 

Thrust Bearing with Rough Surfaces Lubricated by an Ellis Fluid
A. Walicka, E. Walicki, P. Jurczak, J. Falicki
International Journal of Applied Mechanics and Engineering 2014;19(4):809-822
DOI: https://doi.org/10.2478/ijame-2014-0056
 
ORIGINAL PAPER
 

Model of 5R Spatial Linkage in the Geometry of Tori
T. Bil, Z. Budniak
International Journal of Applied Mechanics and Engineering 2014;19(4):823-830
DOI: https://doi.org/10.2478/ijame-2014-0057
 
ORIGINAL PAPER
 

Forming of the Most Convenient Bent Constructional Elements with a Permissible Strength Given
M. Fligiel
International Journal of Applied Mechanics and Engineering 2014;19(4):831-839
DOI: https://doi.org/10.2478/ijame-2014-0058
 
ORIGINAL PAPER
 

Kinematic Analysis of Cpm Machine Supporting to Rehabilitation Process after Surgical Knee Arthroscopy and Arthroplasty
R. Trochimczuk, T. Kuźmierowski
International Journal of Applied Mechanics and Engineering 2014;19(4):841-848
DOI: https://doi.org/10.2478/ijame-2014-0059
 
ORIGINAL PAPER
 

Technical and Economic Aspects of Biomass Co-Firing in Coal-Fired Boilers
M. Dzikuć, K. Łasiński
International Journal of Applied Mechanics and Engineering 2014;19(4):849-855
DOI: https://doi.org/10.2478/ijame-2014-0060
 
Most read
Indexes
 
Keywords index
Topics index
Authors index
eISSN:2353-9003
ISSN:1734-4492
Journals System - logo
In the years 2019-2020, the International Journal of Applied Mechanics and Engineering is financed under contract no. 634/P-DUN/2019 by the Minister of Science and Higher Education from funds for science dissemination activities. The financing amounts to 83.500 PLN.
Task: edition of a scientific journal, its internationalization and ensuring open access to the journal via the Internet
© 2006-2025 Journal hosting platform by Bentus
Scroll to top