Current issue
Archive
About the Journal
About
Editorial Board
Abstract & Indexing
Contact
Editorial Policies
Authorship & COI
Ethical principles
Principles of Transparent Checklist
Open access
For Authors
Instructions to Authors
Detailing Guidelines for Authors
Review process
Review sheet
How to submit
Open Access license
ORIGINAL PAPER
Overview of the Mechanical Forced Vibration Used to Enhance Heat Transfer
1
Mechanical Power Techniques Engineering, Renewable Energy Research Centre, Northern Technical University, Iraq
2
Mechanical Power Techniques Engineering, Technical Engineering College -Kirkuk, Northern Technical University, Iraq
These authors had equal contribution to this work
Submission date: 2025-05-16
Final revision date: 2025-08-20
Acceptance date: 2025-12-02
Online publication date: 2026-03-16
Publication date: 2026-03-16
Corresponding author
Ehsan Fadhil Abbas
Mechanical Power Techniques Engineering, Technical Engineering College -Kirkuk, Northern Technical University, Al-Wasity street, 36001, Kirkuk, Iraq
Mechanical Power Techniques Engineering, Technical Engineering College -Kirkuk, Northern Technical University, Al-Wasity street, 36001, Kirkuk, Iraq
International Journal of Applied Mechanics and Engineering 2026;31(1):43-74
KEYWORDS
Convective heat transferHeat transfer enhancementMechanical vibrationThermal managementVibrational systems
TOPICS
ABSTRACT
This review systematically examines the role of mechanical vibrations in enhancing heat transfer across various thermal systems. Although vibrations are traditionally considered detrimental to mechanical integrity, controlled application of vibrational forces can significantly improve thermal performance by promoting fluid mixing and surface turbulence. The study synthesizes findings from theoretical, numerical, and experimental research involving different geometries such as flat plates, cylinders, and microchannel structures. Results consistently demonstrate that specific ranges of vibration frequency and amplitude can enhance convective heat transfer, with some studies reporting improvements up to 250%. Conversely, inappropriate vibrational conditions can lead to performance degradation or mechanical failure. Key parameters influencing outcomes include vibration mode, fluid properties, system configuration, and thermal boundary conditions. Applications span aerospace, electronics cooling, and energy systems, where vibrational techniques have reduced fouling, improved heat exchanger efficiency, and enabled lightweight thermal management solutions. The findings highlight the importance of carefully tailoring vibrational characteristics to optimize heat transfer while maintaining structural integrity. This work provides critical insights for the design of advanced thermal systems utilizing vibration-assisted heat transfer mechanisms.
REFERENCES (62)
1.
Bergles A.E., Nirmalan V., Junkhan G.H. and Webb R.L. (1983): Bibliography of augmentation of convective heat and mass transfer, II.– Report HTL-31, ISU-ERI-Ames-84221, Heat Transfer Laboratory, Iowa State University, Ames, IA.
2.
Bergles A.E., Jensen M.K., Somerscales E.F.C. and R.M. Manglik (1991): Literature review of heat transfer enhancement technology for heat exchanges in gas-fired applications.– Report GRI 91-0146, Gas Research Institute, Chicago.
3.
Bergles A.E., Jensen M.K. and Shome B. (1995): Bibliography on enhancement of convective heat and mass transfer.– Report HTL-23, Heat Transfer Laboratory, Rensselaer Polytechnic Institute, Troy, NY.
4.
Al-Shorafa’a M.H.M. (2008): A study of influence of vertical vibration on heat transfer coefficient from horizontal cylinders.– J. Eng., vol.14, No.01, pp.2218-2229.
5.
Chen R.-H., Kuo L.W. and Lai C.-M. (2015): The influence of longitudinal vibrations on the heat transfer performance of inclined heat pipes.– Adv. Mech. Eng., vol.7, No.2, https://doi.org/10.1177/168781....
6.
Shokouhmand H., Noori Rahim Abadi S.M.A. and Jafari A. (2011): The effect of the horizontal vibrations on natural heat transfer from an isothermal array of cylinders.– Int. J. Mech. Mater. Des., vol.7, No.4, pp.313-326, doi:10.1007/s10999-011-9170-6.
8.
Li J., Ingham D.B. and Pop I. (2001): Natural convection from a vertical flat plate with a surface temperature oscillation.– Int. J. Heat Mass Transf., vol.44, No.12, pp.2311-2322, doi:10.1016/S0017-9310(00)00276-3.
9.
Kim S.K., Kim S.Y. and Choi Y.D. (2002): Resonance of natural convection in a side heated enclosure with a mechanically oscillating bottom wall.– Int. J. Heat Mass Transf., vol.45, No.15, pp.3155-3162, https://doi.org/10.1016/S0017-....
10.
Zhang X.R., Maruyama S. and Sakai S. (2004): Numerical investigation of laminar natural convection on a heated vertical plate subjected to a periodic oscillation.– Int. J. Heat Mass Transf., vol.47, No.19-20, pp.4439-4448, doi:10.1016/j.ijheatmasstransfer.2004.03.030.
11.
Gomaa H. and Al Taweel A.M. (2005): Effect of oscillatory motion on heat transfer at vertical flat surfaces.– Int. J. Heat Mass Transf., vol.48, No.8, pp.1494-1504, https://doi.org/10.1016/j.ijhe....
12.
Fu W.S. and Huang C.P. (2006): Effects of a vibrational heat surface on natural convection in a vertical channel flow.– Int. J. Heat Mass Transf., vol.49, No.7-8, pp.1340-1349, doi:10.1016/j.ijheatmasstransfer.2005.10.028.
13.
Kim H.J. and Jeong J.H. (2006): Numerical analysis of experimental observations for heat transfer augmentation by ultrasonic vibration.– Heat Transf. Eng., vol.27, No.2, pp.14-22, https://doi.org/10.1080/014576....
14.
Kadhim Z.K. and Sarhan A.R. (2012): Experimental study on the effect of vertical forced vibrations on the free convection heat transfer coefficient of an aluminum flat plate.– Al-Khwarizmi Engineering Journal, vol.8, No.4, pp.44-53.
15.
Sarhan A.R. (2013): Vertical forced vibration effect on natural convective performance of longitudinal fin heat sinks.– Tikrit Journal of Engineering Sciences, vol.20, No.2, pp.60-69.
16.
Kassim M.S., Alhimdani F. and Raheem I. (2015): Experimental study of heat transfer by free convection for horizontal cylinder of composite material under the effect of vibrations.– 10th International Symposium on Advanced Science and Technology in Experimental Mechanics, 1-4 November, 2015, Matsue, Japan.
17.
Sultan A. and El-Tahan H.R. (2015): Natural convection heat transfer from vibrated vertical flat plate.– Mansoura Engineering Journal, vol.40, No.5, pp.22-31.
18.
Kadhim S.K. and Nasif M.S. (2016): Experimental investigation of the effect vertical oscillation on the heat transfer coefficient of the finned tube.– MATEC Web of Conferences, vol.16, p.5, doi:10.1051/matecconf/20163801012.
19.
Kadhim Z.K. and Mery H.O. (2016): Influence of vibration on free convection heat transfer from sinusoidal surface.– International Journal of Computer Applications, vol.136, No.4, pp.1-6.
20.
Sarhan A.R., Karim M.R., Kadhim Z.K. and Naser J. (2019): Experimental investigation on the effect of vertical vibration on thermal performances of rectangular flat plate.– Exp. Therm. Fluid Sci., vol.101, pp.231-240, doi:10.1016/j.expthermflusci.2018.10.024.
21.
Rao B.S. and Ravi Babu S. (2019): Experimental investigation on natural convection heat transfer augmentation with vibration effect.– International Research Journal of Engineering and Technology, vol.6, No.8. pp.1496-1501.
22.
Murad N.K., Lafta H.D. and Abdullah S.E. (2019): The effect of transverse vibration on the natural convection heat transfer in a rectangular enclosure.– Int. J. Mech. Eng. Technol., vol.10, No.6, pp.266-277.
23.
Al-Azzawi M.M., Hussain H.M. and Habeeb L.J. (2020): An experimental study on the influence of forced vibration on longitudinal fins heat sink subjected to free convection heat transfer.– J. Mech. Eng. Res. Dev., vol.43, No.7, pp.326-339, DOI: 10.26480/jmerd.07.2020.326.339.
24.
Abdulrazzaq A.E. and Abbas E.F. (2020): Verification of the Effects of Mechanical Vibration on the Free Convection Heat Transfer Performance of a Perforated Plate.– Master’s Thesis, University of Technology, Baghdad, Iraq.
25.
Rahman A. and Tafti D. (2020): Characterization of heat transfer enhancement for an oscillating flat plate-fin.– vol.147, p.119001, doi:10.1016/j.ijheatmasstransfer.2019.119001.
26.
Al-Azzawi M.M., Abdullah A.R., Majel B.M. and Habeeb L.J. (2021): Experimental investigation of the effect of forced vibration on natural convection heat transfer in a concentric vertical cylinder.– J. Mech. Eng. Res. Dev., vol.44, No.3. pp.124-135.
27.
Khudhair B.K., Saleh A.M. and Ekaid A.L. (2023): An experimental study of forced vibration on natural convection between closed ended concentric and eccentric annular of horizontal cylinder.– Diagnostyka, vol.24, No.1, pp.1-10, https://doi.org/10.29354/diag/....
28.
Idan M.F. and Ramadhan A.A. (2023): An experimental study to show the effect of forced vertical vibrations on the thermal heat transfer coefficient of a flat plate.– Beni-Suef Univ. J. Basic Appl. Sci., vol.12, No.1, p.41, doi:10.1186/s43088-023-00394-5.
29.
Taha M.S., Ates A., Canli E. and Altun A.H. (2025): Circular perforations on vertically sinusoidal wave form plate fin heat sinks for laminar natural convection heat dissipation.– Int. J. Therm. Sci., vol.208, p.109470, https://doi.org/10.1016/j.ijth....
30.
Sreenivasan K. and Ramachandran A. (1961): Effect of vibration on heat transfer from a horizontal cylinder to a normal air stream.– Int. J. Heat Mass Transf., vol.3, No.1, pp.60-67, https://doi.org/10.1016/0017-9....
31.
Klaczak A. (1997): Report from experiments on heat transfer by forced vibrations of exchangers.– Heat Mass Transf., vol.32, No.6, pp.477-480, https://doi.org/10.1007/s00231....
32.
Murphy K.D. and Lambert Jr T.A. (2000): Modal effects on the local heat transfer characteristics of a vibrating body.– J. Heat Transf., vol.122, No.2, pp.233-239, https://doi.org/10.1115/1.5214....
33.
Bronfenbrener L., Grinis L. and Korin E. (2001): Experimental study of heat transfer intensification under vibration condition.– Chem. Eng. Technol., vol.24, No.4, pp.367-371, doi:10.1002/1521-4125(200104)24:4<367::AID-CEAT367>3.0.CO;2-P.
34.
Eid E.I. and Gomaa M.E. (2009): Influence of vibration in enhancement of heat transfer rates from thin plannar fins.– Heat mass Transf., vol.45, pp.713-726.
35.
Cheng L., Luan T., Du W. and Xu M. (2009): Heat transfer enhancement by flow-induced vibration in heat exchangers.– Int. J. Heat Mass Transf., vol.52, No.3-4, pp.1053-1057, https://doi.org/10.1016/j.ijhe....
36.
Al-Azzawi M.M., Habeeb L.J. and Al-Rubaye A.S. (2010): Experimental study of the effect of vertical vibrations on forced convection heat transfer coefficient from circumferentially finned cylinder.– Eng. Technol. J., vol.28, No.17, pp.814-833, doi:10.30684/etj.28.17.20.
37.
Kadhim Z.K., Mohamed A.A. and Ali Abed S. (2012): An experimental study for the effect of vertical forced vibration on pool boiling heat transfer coefficient.– Eng. Technol. J., vol.30, No.10, pp.1662-1676, doi:10.30684/etj.30.10.1.
38.
Gururatana S. and Li X. (2013): Heat transfer enhancement of small scale heat sinks using vibrating pin fin.– Am. J. Appl. Sci., vol.10, No.8, pp.801-809, doi:10.3844/ajassp.2013.801.809.
39.
Chen R.H., Lin Y.J. and Lai C.M. (2013): The influence of horizontal longitudinal vibrations and the condensation section temperature on the heat transfer performance ofa heat pipe.– Heat Transf. Eng., vol.34, No.1, pp.45-53, doi:10.1080/01457632.2013.694776.
40.
Guo C., Hu X., Cao W., Yu D. and Tang D. (2013): Effect of mechanical vibration on flow and heat transfer characteristics in rectangular microgrooves.– Appl. Therm. Eng., vol.52, No.2, pp.385-393, doi:10.1016/j.applthermaleng.2012.12.010.
41.
Pilli A.K., Abishek S., Narayanaswamy R., Jewkes J., Lucey A.D. and Narayanan V. (2014): Computational analysis of fluid dynamics and heat transfer characteristics of a vibrating heated plate.– The Proceedings of 19th Australasian Fluid Mechanics Conference, Melbourne, Australia.
42.
Park K.T., Lee J.W., Lee M.G., Kim H.J. and Kim D.-K. (2014): Nusselt number correlation for vibration-assisted convection from vertically oriented plate fins.– Int. J. Heat Mass Transf., vol.78, pp.522-526.
43.
Zhang L., Lv J., Bai M. and Guo D. (2015): Effect of vibration on forced convection heat transfer for SiO 2-Water nanofluids.– Heat Transf. Eng., vol.36, No.5, pp.452-461, doi:10.1080/01457632.2014.935214.
44.
Saini C.P. and Kumar S. (2015): Effect of vibration on heat transfer enhancement in a rectangular channel heat exchanger.– Natl. Conf. Adv. Eng. Technology Manag., pp.51-57.
45.
Wang Y., He Y.L., Yang W.W. and Cheng Z.D. (2015): Numerical analysis of flow resistance and heat transfer in a channel with delta winglets under laminar pulsating flow.– Int. J. Heat Mass Transf., vol.82, pp.51-65, doi:10.1016/j.ijheatmasstransfer.2014.11.016.
46.
Duan D., Ge P. and Bi W. (2016): Numerical investigation on heat transfer performance of planar elastic tube bundle by flow-induced vibration in heat exchanger.– Int. J. Heat Mass Transf., vol.103, pp.868-878, https://doi.org/10.1016/j.ijhe....
47.
Sarafraz M.M., Nikkhah V., Madani S.A., Jafarian M. and Hormozi F. (2017): Low-frequency vibration for fouling mitigation and intensification of thermal performance of a plate heat exchanger working with CuO/water nanofluid.– Appl. Therm. Eng., vol.121, pp.388-399, https://doi.org/10.1016/j.appl....
48.
Hosseinian A., Meghdadi Isfahani A.H. and Shirani E. (2018): Experimental investigation of surface vibration effects on increasing the stability and heat transfer coefficient of MWCNTs-water nanofluid in a flexible double pipe heat exchanger.– Exp. Therm. Fluid Sci., vol.90, pp.275-285, doi:10.1016/j.expthermflusci.2017.09.018.
49.
Hosseinian A. and Isfahani A.H. (2018): Experimental study of heat transfer enhancement due to the surface vibrations in a flexible double pipe heat exchanger.– Heat Mass Transf., vol.54, doi:10.1007/s00231-017-2213-2.
50.
Liu W., Yang Z., Zhang B. and Lv P. (2017): Experimental study on the effects of mechanical vibration on the heat transfer characteristics of tubular laminar flow.– Int. J. Heat Mass Transf., vol.115, pp.169-179, https://doi.org/10.1016/j.ijhe....
51.
Mousavi S.B. and Heyhat M.M. (2019): Numerical study of heat transfer enhancement from a heated circular cylinder by using nanofluid and transverse oscillation: A comparative study.– J. Therm. Anal. Calorim., vol.135, pp.935-945, https://doi.org/10.1007/s10973....
52.
Abadi S.M.A.N.R., Ahmadpour A. and Meyer J.P. (2019): Effects of vibration on pool boiling heat transfer from a vertically aligned array of heated tubes.– Int. J. Multiph. Flow, vol.118, pp.97-112, doi:10.1016/j.ijmultiphaseflow.2019.06.006.
53.
Setareh M., Saffar-Avval M. and Abdullah A. (2019): Experimental and numerical study on heat transfer enhancement using ultrasonic vibration in a double-pipe heat exchanger.– Appl. Therm. Eng., vol.159, p.113867, https://doi.org/10.1016/j.appl....
54.
Akcay S., Akdag U. and Palancioglu H. (2020): Experimental investigation of mixed convection on an oscillating vertical flat plate.– Int. Commun. Heat Mass Transf., vol.113, doi:10.1016/j.icheatmasstransfer.2020.104528.
55.
Li D., Li S., Zhang Z., Yan G. and Feng Z. (2020): Experimental research on vibration-enhanced heat transfer of fin-tube vehicle radiator.– Appl. Therm. Eng., vol.180, p.115836, https://doi.org/10.1016/j.appl....
56.
Xie P. and Zhang X. (2021): Study of laminar convection heat transfer in single-side-heating small-scale cooling channel with vibration cylinder.– Int. Commun. Heat Mass Transf., vol.120, p.105030, https://doi.org/10.1016/j.iche....
57.
Akcay S. and Akdag U. (2021): Mixed convection heat transfer from a vertical flat plate subjected to periodic oscillations.– J. Therm. Eng., vol.7, No.6, doi:10.18186/thermal.990687.
58.
Kadhim S.K., Ali S.A., Razak N.F.D. and Sani M.S.M. (2021): Vertical vibrations effect on forced convection heat transfer from a longitudinal finned tube.– IOP Conference Series: Materials Science and Engineering, vol.1068, p.012007, https://doi.org/10.1088/1757-8....
59.
Mohammed A.M., Kapan S., Sen M. and Celı̇k N. (2021): Effect of vibration on heat transfer and pressure drop in a heat exchanger with turbulator.– Case Stud. Therm. Eng., vol.28, p.101680, https://doi.org/10.1016/j.csit....
60.
Rasangika A.H.D.K., Nasif M.S., Pao W. and Al-Waked R. (2022): Numerical investigation of the effect of square and sinusoidal waves vibration parameters on heat sink forced convective heat transfer enhancement.– Appl. Sci., vol.12, No.10, p.4911, https://doi.org/10.3390/app121....
61.
Ali F.H.M. and Abaas E.F. (2022): Characterization of Heat Transfer Improvement for an Oscillating Vertical Flat Plate-Fins Under the Effect of Natural Convection Condition.– Master’s Thesis, University of Technology, Baghdad, Iraq.
62.
Zhou F., Zhao Y., Yin E., Hu D. and Li Q. (2024): Effects of vibration conditions on the heat transfer and flow characteristics of cold plates.– Appl. Therm. Eng., vol.248, p.123100, https://doi.org/10.1016/j.appl....
| eISSN: | 2353-9003 |
| ISSN: | 1734-4492 |
Task: edition of a scientific journal, its internationalization and ensuring open access to the journal via the Internet
© 2006-2026 Journal hosting platform by Bentus
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
